End Caps

End Caps

CABRICAL’s Heatshrink End Caps are used for sealing cable ends during installation or storage. They are made from cross-linked polyolefin and have a hot melt glue liner that bonds the cap to the cable jacket.

  1. Quick reliable seal of cable ends
  2. Watertight and unlimited storage life
  3. Highly resistant to ultraviolet rays, aggressive soils, chemicals and corrosion

The CEC Heatshrink cap should be shrunk onto the cable end starting the shrinkage process from the closed end. Once shrink is complete glue should extrude from the edges of the cap.

Heatshrink-End Caps

Cabrical CodeInner Diameter Pre Shrink (MM)Inner Diameter After Shrink (MM)Cable Range O.D. (MM)Recovered Wall Thickness (MM)Length (MM)
CEC25/8258.510-202.868
CEC40/164016.018-323.383
CEC55/265526.028-483.5103
CEC75/367536.045-684.0120
CEC100/5210052.055-904.0140
CEC120/6012060.065-1104.0150

Technical Data:

Conformant Standards: IEC:ASTM
Material: Cross-linked polyolefin with thermoplastic mastic sealant
Continuous Operating Temperature: -55°C to +110°C
Shrinkage Temperature: 120°C
Tensile Strength: 12 MPa
Elongation at Break Point: >400%
Longitudinal Shrinkage:
10%
Dielectric Strength: >15kV/mm wall thickness
Volume Resistivity:
1.0 x 1014 ohm cm
Flammability: Do not use in flame prone areas
UV Resistance: Good