XLP Thin Wall

XLP Thin Wall

XLP Thin Wall Heatshrink Tubing is a Chemically Cross-Linked. It will withstand -55°C to 135°C for normal operating conditions and 250°C for short intervals. The heatshrink can easily be shrunk with a heat gun or a heat tunnel. All heatshrink in this range is flame retardant.

Heatshrink-Thin Wall

  1. Highly flexible
  2. Flame retardant
  3. Abrasion and impact resistant
  4. For use in all electrical and electronic applications
  5. Full range 1.5mm to 125mm diameter with 2:1 shrink ratio
  6. Available in most colours on reels.

CABRICAL’s XLP heatshrink tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.

Cabrical CodePre-Shrink Diameter (MM)After Shrink Diameter (MM)Recovered Wall Thickness (MM)Standard Reel Qty (M)
XLP1.51.60.80.40200
XLP2.52.41.200.48200
XLP33.21.60.48200
XLP54.82.40.48200
XLP76.43.20.56200
XLP109.54.80.62100
XLP1312.76.40.62100
XLP2019.09.50.68100
XLP2525.412.70.8750
XLP3838.019.01.0050
XLP5150.825.41.1050
XLP7676.238.11.2050
XLP102102.050.81.3530
XLP125125.063.51.4015

Lengths and Colours Available:

ColourSuffixReel4ft
BlackBKYesYes
RedRDYesYes
WhiteWHYesYes
BlueBLYesYes
GreenGYesYes
YellowYYesYes
ClearCLYesYes
Yellow/GreenYGYesYes

*Note: Reels of Yellow/Green are available in XLP2.5, 3, 5, 7, 10, 13, 20, 25
*XLP125 available on request

Technical Data:

Compliant Standards: UL224 VW1 File No. E204071
Material: Chemically cross-linked, thermally stabilized flame retardant polyolefin
Continuous Operating Temperature: -55°C to +135°C
Shrinkage Temperature: >100°C
Longitudinal Shrinkage: <5%
Tensile Strength: 14 MPa
Breakdown Voltage: 25kV/mm wall thickness
Volume Resistivity:
1.0 x 1014 ohm cm
Elongation at Break Point:
600%
Water Absorption: 0.15% max
Flammability: Passed
UV Stability: Black Only
Voltage Rating: 600V